Pneumatic Vacuum Elevators
AVS Elevator is a Preferred Installer for Pneumatic Vacuum Elevators, LLC
Founded in 2002, Pneumatic Vacuum Elevators, LLC (PVE) is the inventor and sole manufacturer of the world’s only Air-Driven Home Elevator, the Pneumatic Elevator.
Powered by the most abundant resource in the world, AIR, Pneumatic Elevators are innovative, space-saving home lift solutions that have revolutionized the way people and goods are transported vertically in their homes.
The World’s Only Air-Driven, Self-Supporting, Eco-Friendly, Plug & Play Home Elevator!
Worlds Only Air-Driven Elevator – Increase Your Home’s Value
Residential Elevators – Home Elevator Customer Testimonial
Elegant Design
At PVE, our mission is to create home elevator solutions in which design and technology coincide. Where the utilization of attractive materials and the application of fundamental physics combine to produce an innovative & aesthetically pleasing elevator that enhances homeowners standard of living.

Single Passenger Residential Elevator
350lb. Lift Capacity
External Cylinder Diameter: 30 inches (750mm)
Internal Cabin Diameter: 20 ½ inches (521mm)
Internal Cabin Height: 6’ 7” (79 inches / 521mm)
Power Supply: 30AMP 220VAC
35-40 Feet Per Minute Travel Speed
Through Floor Hole of 32”
In-Line Door Openings ONLY

Two Passenger Residential Elevator
450lb. Lift Capacity
External Cylinder Diameter: 37 inches (933mm)
Internal Cabin Diameter: 32 inches (813mm)
Internal Cabin Height: 6’ 7” (79 inches / 521mm)
Power Supply: 30AMP 220VAC
35-40 Feet Per Minute Travel Speed
Through Floor Hole of 39”
Door Openings
In-Line
Walk-Through
90° Left or Right
Optional Cabin Seat for Accessibility

Three Passenger Residential Elevator
Wheelchair Accessible
525lb. Lift Capacity
External Cylinder Diameter: 52 11/16 inches (1,316mm)
Internal Cabin Diameter: 43 ½ inches (1,118mm)
Internal Cabin Height: 6’ 7” (79 inches / 521mm)
Entrance Way Opening: 32 inches (813mm)
Power Supply: 40AMP 220VAC
35-40 Feet Per Minute Travel Speed
Through Floor Hole of 54 11/16”
Door Openings
In-Line
Walk-Through
Small Footprint
The vacuum elevator uses gravity to descend, drawing no electricity, and minimal energy consumption when ascending with 220 Volt turbines (standard model draws 4.7kilowats).
Portable Elevator
The vacuum elevator is capable of being uninstalled and moved to another location within the existing home, or to another home.
Minimal Construction and Footprint
Very few materials and pre-construction required because the self-supporting unit does not require a shaft, pit, or machine room.
Made In The USA
Unlike other foreign manufactured products on the market, Pneumatic Elevators are manufactured in Miami, Florida, USA ensuring each elevator produced by PVE meets the strictest quality & safety standards. The safety of our customers is paramount, with every Pneumatic Elevator pre-assembled & safety tested at our PVE Factory Headquarters prior to installation.
PVE Safety
Fully equipped with full set of car locking devices for each landing.
In the event of a power failure, the cabin slowly descends to the ground floor, at which point the passenger can exit the cabin.
In the event of catastrophic failure/vacuum loss, the main seal forces down on the mechanical safety brakes and the cabin is suspended within two inches of freefall.
Pneumatic Elevators are annually certified & safety inspected by the prestigious Liftinstituut, one of the world’s leading elevator certification organizations.
Low Maintenance
As the vacuum elevator does not use any pistons or cables, there is no need for routine service calls to lubricate the elevator with oil or other harmful products.
With very few moving parts and minimal wear and tear, the only required maintenance on the vacuum elevator is the main seal that needs to be replaced roughly every 15,000 rides or about four to five years in an average household.
What Our Customers Are Saying

You can also give us a call at (503) 876-3696


